How Does the Slurry Pump Discharge Oil?

I believe that everyone knows about the slurry pump, which may need to be drained when in use. The following Slurry Pump Manufacturers will introduce the draining steps of the slurry pump:

Centrifugal Water Pump

1. If you want to drain all the oil in the slurry pump box, you can unscrew the oil drain plug at the bottom of the box to drain the oil.

2. When the slurry pump is draining oil, the height of the liquid level from the top plate of the oil tank should not exceed 30 mm to ensure the lubrication and cooling of the bearings in the pump. When the volume of the jack working cavity is too large, an additional oil tank is required to ensure After draining the oil, the liquid level is very low and the height is not less than 100 mm in order to avoid suction.

3. After the variable-speed slurry pump starts running for 500 hours, the oil should be changed and the oil tank and filter should be cleaned. The oil quality should be tested by visual inspection and laboratory testing. When the oil quality deteriorates, the oil should be changed in time, and the oil must be cleaned at the same time. If there are metal chips or water in the oil tank and oil filter, find the cause and remove the fault.

4. In the short time when the liquid level is lowered, the bearing is lubricated by the attached oil and the splashing oil of the plunger spring. The oil filter of the oil tank and the oil filter under the pump is made of 230 mesh/inch copper wire mesh. The oil filter should be regular Clean to prevent clogging. The temperature of the oil in the tank should not exceed 60°C during use. Take appropriate measures to cool down if necessary.

Some people may not understand the oil discharge of this slurry pump, so it is necessary to understand the above related content. It is definitely beneficial to the operation of the slurry pump during use. It will be very convenient to operate and bring greater help.

Our company also sells Centrifugal Water Pump, please contact us.