A conveyor pulley is a mechanical device comparable to a conveyor roller that is utilized to alter the instructions of the belt in a conveyor system or to drive the belt or to put tension on the belt. A pulley is far more heavy-duty than a roller as well as used at either end of a conveyor or near the drive/motor. We will supply you with the conveyor pulley-blocks you require and aid you choose the pulley that is right for your conveyor.
We manufacture heavy duty conveyor pulleys, including drum pulleys, wing pulleys, turbine pulleys, engineered pulleys, and special construction pulleys.
Conveyor belt wheels are mechanical equipment similar to conveyor belt wheels, which are used to change the direction of the belt in the conveyor belt system or drive the belt or apply tension on the belt.
Pulleys are much heavier than rollers and are used at both ends of the conveyor belt or near the drive/motor. Choosing the right conveyor pulley for your conveyor can be tricky, this is where we can provide expert help
Conveyor pulleys used to drive conveyor belts. It is usually installed in an external bearing and driven by a motor and reducer. The conveyor head pulley can be flat or arched. Many pulleys have hysteresis to reduce belt slippage. Conveying drums, wing wheels and spiral wheels are the most common styles of drive wheels.
Conveyor belt wheel, used to redirect the conveyor belt to the drive wheel. The tail pulley can have an internal bearing or it can be installed in an external bearing, usually at the end of the transfer bed. The tail wheel is usually used for the reeling wheel to maintain the tension on the belt.
Any freely rotating pulley used in the non-driven position is used to support the belt.
Conveyor pulleys are usually used to improve the traction of the belt and to increase the belt winding tension around the driving wheel.
Conveyor pulley that can be adjusted in the bracket to increase or decrease belt slack or belt tension
Conveyor pulleys are used to redirect the belt and provide belt tension where the conveyor belt system is bent.
The roller assembly is used in the bed of the conveyor as a support for transporting products. These rollers are also used in the return part below the conveyor bed as a support for the return part of the conveyor belt.
our product line meets the demanding requirements of industries such as: sand and gravel quarries, coal mines, unit packaging, food processing, and recycling. These pulleys are manufactured to the same quality standards you have come to expect from Martin.
Copyrights © Zibo Yinfeng Machinery Co., Ltd. All Rights Reserved | Privacy Policy
